When I plug in my Aiper s1 to charge, it blinks red twice, then shut off with no light visible. This would seem to indicate that something is wrong. Any insights ? TIA.
Aiper s1 may not be charging
- Thread starter jbak
- Start date
- Apr 10, 2018
- 6,298
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
But there's no way to know the state of the device if there are no lights. 2 red blinks then OFF. Seemingly off forever. Just dead. No response to ON/OFF button.
Katodude
Silver Supporter
- Aug 22, 2017
- 2,967
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I had a similar problem. Contact Aiper. They will have you send it back for repair. Takes about 2 weeks today. They are pretty responsive. Takes them about 24 hrs to respond to an email.
entered the water, This is a common problem with AIPER. If you are under warranty, please replace it as soon as possible
