Latest activity Postings Media Albums About
-
-
JohnT reacted to pjt's post in the thread Difficulty determining PH, TA, and CYA before a SLAM with
Like.
You can pour the contents from the viewing tube back into the dispensing bottle and run the test several times. I normally fill to a... -
JohnT replied to the thread rust screw inside Jacuzzi sand filter valve.Welcome to TFP! Replacing the screws is certainly possible. But removing a broken one in a timely manner might be a challenge. My...
-
JohnT replied to the thread Difficulty determining PH, TA, and CYA before a SLAM.PH and TA are mostly irrelevant to the SLAM. Get the pool clear, then worry about them.
-
To be clear, unplugging is fine as long as you first stop the pump running at its switch.
-
Hardware stores carry the DIY assemble your own cable kits. Its not hard. But if youre using the plug as a power switch, it would help...
-
The plug is not a 20A plug. Is the wiring for the outlet 12g copper? Is the outlet 20A?
-
JohnT replied to the thread 2 weeks of SLAM and still green.Welcome to TFP! A green pool is a chemistry issue, not a filter issue, though the clarity may or may not have to do with your filter...
-
JohnT replied to the thread Clear pool won’t hold FC.I’d probably SLAM just to clear the problem. Should be a fast one.
-
JohnT replied to the thread Clear pool won’t hold FC.Welcome to TFP! When you allow FC to get very low as yours is, algae can get a foothold. Your regular chlorination may keep it from...
-
JohnT replied to the thread New Pool “Gal”.Welcome to TFP! With no CYA, you’ll not be able to hold chlorine regardless of what your salt cell is doing. You need to get chlorine...
-
JohnT replied to the thread Just for Fun - What is your TFP Expert Opinion:).Certainly could be etched away or worn away plaster exposing the gunite underneath
-
JohnT replied to the thread New guy with questions about my old sand filter.Welcome to TFP! Algae is 100% a chemical issue. Lack of chlorine. A pool guy who shows up once a week simply can’t properly chlorinate...
-
JohnT replied to the thread New Pool Owner.Welcome to TFP!
-
JohnT replied to the thread Sta-Rite Heater HLS error.Your pool guy has never seen a bad high limit switch on a heater??? Measure resistance of the switch. With the heater off, it should be...
-
JohnT replied to the thread Got my water test kit and trying to figure out what to adjust first :).Welcome to TFP! Your numbers are tolerable except for chlorine and CYA. You can live with that CYA, but chlorine is your first, second...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…