- May 23, 2015
- 25,674
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Also, as far as pool water chemistry is concerned, yesterday at around 3pm I measured an FC of 3.0 as I had let the SWG run at a lower output for a while to come down off of a recent FC high from a teenager party. And for those of you that might be like, “OMG!! You went below the minimum …. 


” let me just say,
I decided to bump it up with 1/2 gallon of FC and got to 6.6ppm. Then the pool ran for the rest of the day with no SWG output and overnight. 16 hours later, with zero SWG output the entire time, I measured the FC at 6.0. So thats a 0.0375ppm/hour loss rate. Pretty darn good in my opinion.
The pool water remains clean, clear, and sans-wasps … aka, flying jalapeños…





I decided to bump it up with 1/2 gallon of FC and got to 6.6ppm. Then the pool ran for the rest of the day with no SWG output and overnight. 16 hours later, with zero SWG output the entire time, I measured the FC at 6.0. So thats a 0.0375ppm/hour loss rate. Pretty darn good in my opinion.
The pool water remains clean, clear, and sans-wasps … aka, flying jalapeños…