Please help a good add for pump and motor. They left may years ago and just today the motor blew its electrical. We can say 24000 gal pool and 60 ft DE filter and salt water just last year, if some whatever adds to the list. I have limited unfortunately I can now the great forums and many tutorials for TFP because had a stroke just three December. But I'd sure what when ever I can and get started. Thanks.
Pump and Motor Get What
- Thread starter DBissett
- Start date
- Jul 21, 2013
- 63,868
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
What HP is your Hayward Super II pump?
Is it connected to 120V or 240V?
www.troublefreepool.com
Is it connected to 120V or 240V?
Pump Basics - Further Reading
www.troublefreepool.com
I can't tell anything about the Hayward Super II because it's going to anything. The motor so old the metal well it blow up electrical today. The one told me it would update motor and pump just now.
- Jul 21, 2013
- 63,868
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Sorry, I do not understand what you posted.
Show us a picture of the pump circuit breaker.
- Jul 21, 2013
- 63,868
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Show us a readable picture of the motor data plate....
Need to see the pump circuit breaker to know if you have 120V or 240V.
Need to see the pump circuit breaker to know if you have 120V or 240V.
- Jul 21, 2013
- 63,868
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Which one is your electrical wiring?
We do not know if we can recommend a pump that requires 230V or if you must have a pump that runs on 115V.
- Jul 21, 2013
- 63,868
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
That tells me your pump is 1.5HP.
Still do not know what your actual voltage in your electrical wiring is.
If you have 230V running your pump, which you probably do, a Nidec Neptune NPTT225 motor will work.
Please check, or have someone check, your voltage. A good way is to just look at your circuit breaker for the pump. Is it a double-pole breaker, two handles connected? Then you have a 230V system.
Thanks from looking because I have zero electric for anything. I guess we'll have to some pool to view for we get this motor and/or pump after work.
I'll find whatever the 230V probably does....I've heard of a Nidec Neptune NPTT225 motor will a want one? I've just Leslie I'm just looking motors and pumps just now today.
The last week my old pump stopped work when it electrical stopped working, and a new Pentair VS Monday or Tuesday will get finally to day. The pool is out of chlorine probably 10 days but do I should SLAM it when stop SWG at first, and just the start the SWG and starts when it Pentair VS? When the Pentair VS first stops my pool levels got out off all and reset levels. Thanks.
- Jul 21, 2013
- 63,868
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You need the pump running to follow the SLAM Process
The SWG should be OFF during the SLAM Process
Once you pass the three exit criteria for the SLAM Process then turn the SWG on.
Please edit your post and typos to make your questions clearer and understandable.
The SWG should be OFF during the SLAM Process
Once you pass the three exit criteria for the SLAM Process then turn the SWG on.
Please edit your post and typos to make your questions clearer and understandable.
Last edited:
Thanks very much your help. I will follow your SLAM and right away. Unfortunately I had a stroke in December and I know lot of what to know, but speech can I doesn't either understand or I can't some information can say correctly. I'm told that I will hopefully getting better will 3 to 6 or 10 months again. I was actually a clinical psychology and I am hate the problems now here. Your about three years were huge lessens for TFP had great pool tell. If can't continue when I permit if well when I do better. Thanks truly.
- Jul 21, 2013
- 63,868
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I understand. Do the best you can and we will decipher it.
You may want to describe your communication handicap in your signature so everyone will be aware when they read your posts. Or use the Report link and ask a mod to help you with that.
I'm sorry to hear about the stroke and I see now that you mentioned it above. It can really mess with your communication skills. Your first post makes more sense now. Keep up what will be the hard work down the road.
Our Pentair WhisperFlo VS started and worked my guy for the first general way to start the pump. The WhisperFlow started to pump first and then the several third pumps started from 1,2,and 3 speeds. I'm trying to understand how to use the setting pumps.....I guessing here where here goes. So we begins use the 1,2,3 speeds like this(maybe)......on set 1 speed for like 3000 and set that speed for 8:00 to 11:00, then set 2 speed like 1400 and set that speed 11:00 to 3:00, then set 3 speed for 2200 and speed for 3:00 to 6:00. If I understand that correctly will that 10 hours will pumps. Will you have to start the pump over again every 10 pumps? But, however, do you support to combination three speeds and settings together all of the 24 pump total. Either way, I'm you suppose to mount 1,2,3 speeds, and either long speeds. The other question is how or why to the salt.
I'm starting to run the SLAM first thing tomorrow. Will may run for 3-4 days and will need to hope kinks like the pump. Thanks.
I'm starting to run the SLAM first thing tomorrow. Will may run for 3-4 days and will need to hope kinks like the pump. Thanks.
Some one I've read for all my pool 24000 for 24 hours runs all the time. Yes how pool is correct, or more? How is the fill the Speed, Time and Duration really add to find the create 24000 gal for the 24 hour?