The hose on my Polaris is coming off very frequently.
Is there a way to lower booster pump pressure?
Is there a way to lower booster pump pressure?
Polaris 280 Hose keeps coming off
- Thread starter nabin
- Start date
Turn the large plastic bolt connector on the side of the wall fitting counter clockwise a little . That will reduce the water pressure and also adjust the Polaris's speed.
Thank you. Can we do something on the booster pump too to lower the pressure? Last week the "Zodiac D29 UWF Quick Disconnect" burst into pieces and I replaced it along with new "Polaris 9-100-9002 Pressure Relief Valve" and also the " Pool Hose Swivel" that was leaking. I don't want these damaged again.
Also is it normal for water to continuously ooze out of the Pressure Relief Valve? That is happening in min even with the new one.
I just put a new connector and pressure relief valve on also and I have quit a bit of water coming out. If I close the pressure relief valve all the way the polaris wants to crawl out of the pool.
THIS. Install the blue or red restrictor plate in the wall mount. Wheel speed of your 280 will determine which one to use.
Bryan
I just checked Amazon. Tons of them.
Look up the proper wheel speed for your cleaner, and use the proper restrictor.
Bryan
Look up the proper wheel speed for your cleaner, and use the proper restrictor.
Bryan
Zodiac UWF Connector Assembly (9-100-9001) - INYOPools.com
The red or blue plate snaps into the wall fitting from the back.
The red or blue plate snaps into the wall fitting from the back.
I'm not able to get the wall fitting out. It is so tight.
Is it unscrewed clockwise?
Is it unscrewed clockwise?
Coming off on which side? UWF pool wall mount or on the Polaris? If it's UWF wall mount just rotate it and drag outward a bit to lock. Or the lock mechanism already got broken.
I just checked mine. The Polaris hose comes out of the wall mount with a quarter turn counter-clockwise. The wall mount itself also unscrews counter-clockwise. The restrictor plate is installed behind the wall mount.
Bryan
Bryan
My problem - my wall mount does not have restrictor plate.
I need to unscrew the wall mount, and am unable to do it.
Is there special tool? I'm not successful at all.
https://www.amazon.com/Zodiac-6-500-00-Universal-Fitting-Replacement/dp/B001IA7888/ref=pd_bxgy_86_img_2?_encoding=UTF8&psc=1&refRID=5BVRAJ8MKMVM6P08PX86
Nabin, Is this what your wall mount looks like? If it is, then it just simply unscrews. It might be tight, and might need some tools. Mine simply unscrews with just my hands.
Nabin, Is this what your wall mount looks like? If it is, then it just simply unscrews. It might be tight, and might need some tools. Mine simply unscrews with just my hands.
Thank you!!! I ordered it.
- - - Updated - - -
It is. However it didn't unscrew. As suggested in the forum, I ordered Fitting Removal Tool part number 10-102-00.
Similar threads
