Search results

I believe the check valve should be after the filter, it is on mine anyway.

The skimmer bolts to the pool wall, no rebar or concrete needed. I (think) I attached the install instructions from Hayward, otherwise, search for Hayward Auto Skim install. That wall looks pretty crusty, not sure if it has existing holes or not. You may need to patch with a piece of steel...

What coping are you going to use?

It looks like it would work, but I wouldn't use it. Being PVC I would worry about it holding up over time and the liner coming out or the track breaking.

I got mine from Royal. https://www.royalswimmingpools.com/Inground-Pool-Coping.html They had the best prices and were in stock at the time.

I have some left-overs from my pool remodel. They are for use with a liner, so not sure they would work for you. The ones I have. https://www.royalswimmingpools.com/clip-loc-capstone-without-liner-track-foam-forms-8cf1000nt.html If you think they will work for you, let me know.

That floor looks great, when can you do mine? As far as the horrendous weather this week in WI, It was a great week to be in the pool, well a pool with water in it:LOL::LOL::LOL:

I have been using my pit boss AustinXL for about a year, and absolutely love it. I went with a Pit Boss from a coworker recommendation and cost. Also @jseyfert3 has one. They have great customer service, one of my wheels got a flat spot and they sent new wheels with some rubs. I would buy it...

Check out Menards. Liquid pool shock $3.99/ gal 12.5%

I'm interested. Sent you a message

Thats surprising to hear. It's a large "wad" on the tubes.

This is what I did. I moved mine from the top header to the lower, and it works great. I was getting air with a single speed pump.

Got the leak to stop. New heater works great. Thanks for all the help

Thanks that helps a bunch. The elbow out of the heater has what looks like jb weld on it from previous owner. Then the small line goes up from the pump and t's off. That t is broken. I'll change it all out. Thanks for the help

New heater installed. Filed up tub. Leaking from t fitting above pump. There is a small (1/4"?) Tube coming out of heater circ pump that t's off. Not sure where either goes. The plastic t broke. I will source one, but what it's it for? Ozone maybe. My ozone gen is long gone. Do I need it...

Breaker does not trip. Heater should be here Friday. Have fun fixing yours. 🤟

I'm pretty sure its the IQ2000. It does have the No-fault 6000. I pulled the heater connections off the relay and put the probes on the relay and got something like 238 volts. I then pot the meter on ohms and stuck each probe in the disconnected heater wires and got nothing. I have been...

I have 220 at heater, and checked a house outlet to confirm meter working. I do have a manual reset on the heater. I pushed it, but it didn't seem to do anything.

I did check an outlet it's 120, so it's working. I guess I'll be ordering a new heater. @RDspaguy you have a favorite place to order from? Thanks for all the help

Thank's for the replies. I do have 220 at the heater. The display does work. This model doesn't show the current temp just the set temp. I checked resistence across the heater wires and showed nothing (not zero, blank) on the pos meter. I'll have to get a better one.

I have an old (1999) Hot Spring tub that won't heat. We turn the temp down during the week to 85, then turn up on Friday to enjoy the weekend use. It has been turned down since the first week of Feb, too cold to use it. This past Thursday I turned it up to 104 like usual. Friday afternoon I...

You still enjoying the Pit Boss? I know you haven't had it long. I'm thinking about picking one up myself. Would you buy it again?

Welcome to TFP Have you considered cantilevered concrete coping? I am planning replacing my aluminum coping sometime soon, most likely with concrete.

I have the same issue, but no water loss that I can tell. I bought a new MPV last year (generic) as mine was old and worn out. It worked great last year. I just opened the pool last weekend, and thought everything was good. When I went to start the pump in the morning, it was empty and...

I do not envy you. That is a lot of work. I need to chase some leaks on my tub, it's been leaking since "new to me" about 3 years. I don't even want to start tearing it apart. Good Luck.

I turn mine down to 80 every week, and back to 104 for the weekend shenanigans. I don't think it will get turned up this weekend

I have Vortex panels, so a different mounting system. I glued down some pieces of stainless steel, but my roof is asphalt. From the vortex manual: Note that the bottom headers are not secured with a Header Clip to allow for expansion. Note that this expansion can cause abrasion to some roof...

My son (and myself) are extremely jealous

In my opinion, the younger the kids the less they care about water temp, just want to get in. I'm in Wisconsin where it never gets warm. The first couple of years we had the pool we could only float most of the time, water was too cold. Last year I put up solar panels, 1/2 coverage of pool...

Last week my pool gained about 15 degrees, and then lost it all this weekend with the cold and rain. Looking at the pics has me wondering about the red broken handle valve, does this usually stay in the open position, which it appears to be in, or do you move it? In my system there is a check...