Latest activity Postings Media About
-
-
jklocke replied to the thread Pentair IntelliConnect & IntelliChlor IC 40.Can you change the output on the IC40? The cell light is only on when the IC40 is producing chlorine. I would double-check the RS-485... -
jklocke replied to the thread Pentair IntelliConnect & IntelliChlor IC 40.You should see the % output change on the IC40 after you change it in the Pentair Home app. There is a slight delay, but never more...
-
jklocke replied to the thread Pentair Pool Automation.IntelliConnects with host firmware 1.6.2.5 and above now have the ability to control the SuperFlo VST manufactured after 2020, and I’ve...
-
jklocke replied to the thread Will the Intelliconnect work with the Superflo VS?.Which model Superflo VS pump do you have? The newer ones with RS-485 port will now work, even though the manual says they do not. I...
-
jklocke replied to the thread Pool light control question.I don't have a color light, but here is what the options are for adding a light to one of the Intelliconnect relays: All Pentair...
-
-
-
jklocke replied to the thread Floating deck, best sealer?.If you can get it in your area, TWP 100 is the way to go. TWP® Total Wood Protectant Prepping the wood properly before applying any...
-
jklocke replied to the thread Intelliconnect support nonexistent.I agree that there is little documentation on the Intelliconnect, although it does seem like Pentair is paying a little more attention...
-
Wanted to report back as I was finally able to reroute the plumbing and have IC40 horizontal now. Went from having to run at 2500 rpm...
-
jklocke replied to the thread WhisperFlo VS and intelliconnect.Holy smokes! That's way too high to engage the flow switch. When was the last time you cleaned your sand filter? Maybe a deep clean...
-
jklocke replied to the thread WhisperFlo VS and intelliconnect.If there is water moving through the system it is safe. What you don't want is the IC40 to be on when the pump is off. That could...
-
jklocke replied to the thread WhisperFlo VS and intelliconnect.I can't check what is lit or not lit on my system because it's still put away for the winter. :sleep: If the flow light is lit then...
-
I figured out the issue partly, My clock is off by 1 hour even though it’s all set right. I reset the pump to factory settings and...
-
jklocke replied to the thread WhisperFlo VS and intelliconnect.I looked at the pics you posted on your thread, and it looks like the 2nd pump speed is set as a timer, not as a schedule. Check on...
-
-
jklocke reacted to Markski's post in the thread Will superflo vs connect to intelliconnect with
Like.
It came with the 1.6.1.5 version. Production date was October 2023 i purchased it 2 weeks ago. It was ready
-
-
Loading…
-
Loading…
-
Loading…
