I opened my pool about 5 weeks ago and started my pump back up. Upon adding the first bit of chlorine my pool turned brown. I originally added some sequestrant and it cleared up a day or so then turned brown again. I had some small patches of algae from the off season so I decided to go through the SLAM process. I got the pool up to SLAM levels a few days which seemed to dissipate out the metals and stained the pool brown, I then let the FC get back down to 0 and done a AA treatment which got the pool clear again. I started slowly adding LC and got my FC back up to around 4. Added CYA according to pool math all was good for a few days then the pool turned brown again. I added more purple stuff and some metal out and the pool cleared again for two days and now has turned brown again. Should i run the FC back up to dissipate again, or what should I do to get a handle on this? I hate to have to AA the pool again. I haven't had this issue to this extent in the past. Currently FC-5, CC-.5, TA-100,, CYA doesn't seem to read but has only been a few days. PH-7.2
TF PRO kit.
Thank you!
TF PRO kit.
Thank you!
Last edited: