W
Latest activity Postings Media About
-
-
Wwireform replied to the thread Filter at 0 psi.Either or but both statements can't be happening.
-
Wwireform replied to the thread SWG + algae problems.You also have an error code called Leslie's which is written all over your thread but it's an easy one to clear and done with.
-
Wwireform replied to the thread I am the "Poolosh1".Welcome, Hit us up.
-
WWelcome
-
Wwireform replied to the thread Filter at 0 psi.Not worried about leaks but rather if the inlet and outlet were mixed up. We have seen this before.
-
Wwireform replied to the thread Filter at 0 psi.Just a thought, are the inlet and outlet piped correctly?
-
Wwireform replied to the thread Filter Pump pressure high after full flush of FNS 60.If you're getting strong return flow and good suction then it just may be system design.
-
Wwireform replied to the thread Filter at 0 psi.Pictures of the equipment is in order.....
-
Wwireform replied to the thread Finally upgraded!.Always, I believe it comes with the pump unions which have O rings too which will need to be lubed also.
-
Wwireform replied to the thread No chlorine???.All the above recommendations but firstly delete the pool store from your GPS. We don't/can't compete. Get one of the recommended test...
-
Wwireform replied to the thread Raypak 406A Header question.Correct, but the idea is also to start in the middle and work towards the sides to spread it so it can go down without a high spot.
-
Wwireform replied to the thread Raypak 406A Header question.Did the first round snugish and then again tight by feel. No leaks going on three weeks. Make sure grove is lubed before the gasket is...
-
-
Wwireform replied to the thread Let’s see your water after removing winter cover!! *PICS THREAD*.The picture is what was vacuumed out from it but the water is crystal clear. So far every one of the pool openings with the winter...
-
-
-
Loading…
-
Loading…
-
Loading…
