J
Latest activity Postings Media About
-
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..Update: I replaced the SWG with a Brand New IC40 and it resolved my issue. There is no longer a high salt flashing light and The Salt...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..Also, my MA mixture has always been weak, like 10 parts to 1 (really slow, but effective). I’m going to miss watching that bad boy...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..My TA hovers around 100-110 typically. Looks like I’ll be grabbing another test kit. These test kits also have a “shelf life”, so I’m a...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..It’s the K-2005 kit. I’ll dump some MA to bring the Alk down (picture me dumping a gallon straight into the pool like a madman…seriously...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..I love the “electronics may be getting tired”, LOL! Couldn’t have thought of a better way to say that! I get some pretty good scaling on...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..Update: Did the “reset” as recommended. ET still reading 7500. Once I replace the IC40 this week, I’ll update again. Note: The “Good”...
-
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..First off, thank you very much for the quick replies and for being a gentleman! I’ll give it a try. My first thought when all this...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..Yesterday, I did a normal power down, by flipping breakers, unplugged IC40 waited for 15 seconds. After, I plugged IC40 back in and...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..Also, I went ahead and purchased a new IC40 SWG which is on the way. How could my salt reading on easy touch be so high when salt level...
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..I’ll do an overnight chlorine loss test as recommended. If I do have an algae problem, what’s the best way to treat for that?
-
Jjasondestiny11 replied to the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing..I measured salt level with a Taylor K kit (tested all chemistry with Taylor K kit as well), and 3 trips to Leslie’s store within a 5-day...
-
Jjasondestiny11 posted the thread Intellichlor IC40 SWG Falsely Reporting 7500 ppm salt level (true level is 3,000ppm), not outputting Chlorine, and High Salt light is flashing. in Salt Water Chlorine Generators (SWG).I have a Pentair IC40 SWG (8400 gallon pool) and the SWG is 8 years old (only 40% of cell used per diagnostic). The salt reading on...
-
-
Loading…
-
Loading…
-
Loading…
