Tile Calcite Removal

ShallowWater

Well-known member
May 8, 2020
482
Riverside, Ca
Pool Size
11000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
After completely polishing my pool with great success due to excellent advice on here, I'm ready to tackle the calcium on the tile.

In my other thread it was mentioned to get it done professionally. I reached out to one person who does this so far and. I don't think they're interested.

As can be seen it isn't that bad but I'd like to get in front of it.

Pumice stones don't cut it. Considering dropping the level below the tile line when it warms up and using a 5:1 water to MA mix in a squirt bottle with a stiff plastic brush.

Thoughts?IMG_6830.jpeg

Pool for your delight
IMG_6822.jpeg
 
Just for the record, I'm not confident enough to use an abrasive disc on tile. Research and attempt at your own risk.
I used it to get scale off my porcelain tiles. I am not sure if it will scratch glass tiles.
 
  • Like
Reactions: Rancho Cost-a-Lotta
@ajw22 might be able to provide you with information on an abrasive disc that might work. Based on your previous thread, you got the right guys to do the work.
Right guy.. just one guy for four days straight. he's a laborer I use for lots of stuff. The tile I just want to do myself, in the pool with a cocktail in hand. The gel acid sounds good but what does that do to my chemical balance?
 

Enjoying this content?

Support TFP with a donation.

Give Support
Nope. What makes you think it is two step?