I'm new and can't find the link
Ok I put a level on them and every one of them are exactly the same tilt But they ARE on 1/2" pavers. So what now??Looks like more than 1 in the pic
. Looks like some are leaning left,right,in and out... if it was me I would double check them all with a level
Ok I put a level on them and every one of them are exactly the same tilt But they ARE on 1/2" pavers. So what now??
Christi
The legs will tilt out at the bottom but should be strait vertical with no left or right tilt as you look at the pool, hope that makes sense.
Edit: After looking at your picture your pavers should be level with the ground that the pool is sitting on (dug in the ground) I don't know if that is putting excess stress on the liner or not but I wouldn't leave it that way. It looks like your upright posts are vertical instead of being tilted out at the bottom a little.
You misunderstood what was being said. The pavers should be buried at ground level so the top of the paver is level with the ground surface. Right now with them sitting on the ground you are 2" higher putting extra strain on your pool liner causing it to stretch and possibly tearUpright posts are leaned inward. It is level all the way around
Christi