Hi everyone, new to the forum and world of pools.
Purchased a new house with the intention on getting an inground pool constructed in the spring of 2025.
Have met several pool builders, received quotes, information, etc.
Leaning towards the following setup, but would appreciate any comments or feedback:
Vinyl
Saltwater
15x30' and within this a 6x15' tanning ledge (add 3' for steps, leaves about 21' for swim area? - might have room to stretch length a few feet...)
Depth - TBD - 3.5' to 6'? Thoughts?
Automatic Pool Cover
Cartridge Filter
VS Pump
Bigger heater (350-400K BTU)
Possible bubblers in tanning ledge?
2 lights, but add more or to tanning ledge?
Waterfall feature/wall or stay away?
Appreciate all your comments and suggestions.
Happy to answer any questions you may have.
Thanks everyone!
Purchased a new house with the intention on getting an inground pool constructed in the spring of 2025.
Have met several pool builders, received quotes, information, etc.
Leaning towards the following setup, but would appreciate any comments or feedback:
Vinyl
Saltwater
15x30' and within this a 6x15' tanning ledge (add 3' for steps, leaves about 21' for swim area? - might have room to stretch length a few feet...)
Depth - TBD - 3.5' to 6'? Thoughts?
Automatic Pool Cover
Cartridge Filter
VS Pump
Bigger heater (350-400K BTU)
Possible bubblers in tanning ledge?
2 lights, but add more or to tanning ledge?
Waterfall feature/wall or stay away?
Appreciate all your comments and suggestions.
Happy to answer any questions you may have.
Thanks everyone!
