After all the work to make the nicest cleanest pool on the block, my wife wants for her birthday present to have me convert our pool into a foam party at some point this year
Most posts on TFP are on how to REMOVE foam. Does anyone know the opposite - how to add a safe foam product that will not mess up my pump and filter long-term?
In brief smirking research I did stumble across the 'Dr. Dance Party Packs' (e.g. https://partymachines.com/product/foam-powder-packs-10-powder-packs/ and single packs on Amazon) which claim to be 100% organic.
For dispersion, I do not intend to spend hundreds on the fan and sock but might rig something up. I have a spare pressurized water return line that used to go into our Polaris motor then into the pool, and at present is looped direct into the pool (due to using Dophin robot to clean instead). So I could disconnect that line and use it to feed into foam/fan.
Is this all too crazy? Reality check appreciated, thanks!
PS - resorts do it at their pool which was apparently the inspiration, like so:
In brief smirking research I did stumble across the 'Dr. Dance Party Packs' (e.g. https://partymachines.com/product/foam-powder-packs-10-powder-packs/ and single packs on Amazon) which claim to be 100% organic.
For dispersion, I do not intend to spend hundreds on the fan and sock but might rig something up. I have a spare pressurized water return line that used to go into our Polaris motor then into the pool, and at present is looped direct into the pool (due to using Dophin robot to clean instead). So I could disconnect that line and use it to feed into foam/fan.
Is this all too crazy? Reality check appreciated, thanks!
PS - resorts do it at their pool which was apparently the inspiration, like so:
