New pool with the PDA. Wanting to have PDA at the pool for basic equipment on/off control but also the App and Web GUI for easier programing. Spent a lot of time researching Jandy (tech support and manuals), YouTube, Amazon, etc. I have the upgrade kit here ready to go. Looks like a straightforward swap after watching many YouTubes and understanding the Aux and JVA connections.
iAquaLink 2.0 - How To Install - YouTube
Aqualink 2.0 Install Tutorial (1/5) - YouTube
Questions:
1.)Regarding the dip switches I was able to find what I believe to be the current manuals for both systems - the #6 dip switch has me confused:
https://www.jandy.com/~/media/zodiac/global/downloads/0748-91071/6840.pdf
https://images.inyopools.com/cloud/documents/aqualink-pda-install.pdf
Any input?
2.)I plan to review all of the current settings in the PDA for light type (Hayward) and variable speed pump settings and will record them to re-enter with the new Power Center PCB. Will this work?
3.)Assuming the current PDA will still work without any additional configuration? Jandy tech support said it would. I also want to eventually connect this system to Control4. Anyone done this?
Any watch-outs from those who have completed this?
TIA!
Referencing the closest / most recent thread I could find in my research:
iAqualink 2.0 Upgrade - Connector Question
iAquaLink 2.0 - How To Install - YouTube
Aqualink 2.0 Install Tutorial (1/5) - YouTube
Questions:
1.)Regarding the dip switches I was able to find what I believe to be the current manuals for both systems - the #6 dip switch has me confused:
https://www.jandy.com/~/media/zodiac/global/downloads/0748-91071/6840.pdf
https://images.inyopools.com/cloud/documents/aqualink-pda-install.pdf
Any input?
2.)I plan to review all of the current settings in the PDA for light type (Hayward) and variable speed pump settings and will record them to re-enter with the new Power Center PCB. Will this work?
3.)Assuming the current PDA will still work without any additional configuration? Jandy tech support said it would. I also want to eventually connect this system to Control4. Anyone done this?
Any watch-outs from those who have completed this?
TIA!
Referencing the closest / most recent thread I could find in my research:
iAqualink 2.0 Upgrade - Connector Question
