Did chemistry check on 16000 gal. pool yesterday. Ph 8.2, TCL 1.0, TA 110, CYA 70. Added 32 oz muriatic acid, brought ph level down to 7.4, but now the CYA test shows less than 30 ppm using Taylor 2000 test kit. How do I get an accurate CYA test?
CYA Level
- Thread starter BIG R
- Start date
- May 3, 2014
- 62,651
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Assuming you have a Taylor K2006C test kit, follow Water Testing Instructions - Further Reading
I suggest you read through Pool Care Basics - Trouble Free Pool and even look at a few of our videos TFP-TV - Trouble Free Pool
Assuming you have a Taylor K2006C test kit, follow Water Testing Instructions - Further Reading
I suggest you read through Pool Care Basics - Trouble Free Pool and even look at a few of our videos TFP-TV - Trouble Free Pool
Yes, I use the 2006C Test Kit.
Even after 30 years of testing my pool water, your attached tips and instructions are very helpful. Thanks
Even after 30 years of testing my pool water, your attached tips and instructions are very helpful. Thanks
Similar threads
