We’ve got a 1.5 year old pool that’s had issues with one of our two bubblers, intermittently, almost since it was built. One bubbler, the one closest to the equipment works perfectly, with a fountain of water bubbling up without problems. The other bubbler, further down the line will splash and spin crazily for periods of time and then work fine for a little while. It can work fine for months at a time and then, like just recently, it’ll splash and spin almost anytime it’s on. The bubblers are not plumbed separately and the valve is wide open. I can’t think of how we could adjust them individually. If you plug the valve for a moment, it’ll work for a few minutes before spinning again. We haven’t called anyone yet and may not, since it’s a bubbler and not intrinsic to the pool operation, but it’s terrible frustrating and ought to be working! any suggestions?!
We have a 14,000 gallon in-ground Pebble-Tec pool, all Hayward equipment, and I’ll try to update my info soon. If anyone needs specifics I can get them. Thank you in advance!!!
We have a 14,000 gallon in-ground Pebble-Tec pool, all Hayward equipment, and I’ll try to update my info soon. If anyone needs specifics I can get them. Thank you in advance!!!