Configure iAqualink for waterfall

[orphancars]

Happy Friday everyone!!

I need a little help configuring my iAqualink. To begin with, I followed the excellent instructions here:

Jandy JVA 2444 with iAqualink 2.0 to automate Waterfall

I want to connect a Jandy JVA 2444 to my iAqualink 2.0 to automate the waterfall. It seemed straight forward until I realized the JVA 2444 has a 3-prong female connector and I thought I would be connecting it to one of the AUX but it only accepts a 2-Prong connector. The only available 3-prong...

www.troublefreepool.com

....and I have everything working, thanks to ajw22! The issue is how to I set up my iAqualink on my phone/tablet? Here is what my home screen currently looks like. I'd like to rename "cleaner" to "waterfall." In case they're needed, I also included screenshots of my customize home screen, my label auxiliaries screen, and my assign JVAs screen.

A question for the bonus round (har) -- on the home screen, is there a way to _remove_ unneeded tiles? I don't have a spa or heater(s), so would like to get those taken off.

Thanks for the help!!

 

[ajw22]

@PoolGate knows his way around iAqualink.

 

[PoolGate]

You have your "Label Auxiliaries" screen posted. You can call them whatever you want through that screen. It doesn't matter what is in the "Assign JVAs" section. Then use that name for your home screen in the "Customize Home" section. I don't think you can remove anything from the Home screen however.

 

[orphancars]

Thanks PoolGate -- that helps somewhat. My problem is that I can't find anywhere in the app to change "Cleaner" to "Waterfall". Check out the top of this thread/post.....I have Aux2 through Aux7. Aux1 has, for want of a better term, disappeared, and the Cleaner doesn't appear in that list.

 

[PoolGate]

Oh - Interesting I did not notice that the first time. But you are using AUX1 for your Waterfall? This is probably a dipswitch setting.

4.1.4 Label Auxiliary Functions MENU > SYSTEM SETUP > LABEL AUX > CHOOSE LABEL Press the MENU button, scroll to SYSTEM SETUP and press ENTER. Scroll to the LABEL AUX menu and press ENTER. Press the button (on the control panel) to be labeled (example: AUX1). Scroll to the desired label and press ENTER. Repeat for all functions. Note If DIP switch S1-1, 2 or 3 are on, auxiliaries 1, 2 and 3 are labeled CLEANER, LOW SPEED and SPILLOVER respectively and cannot be relabeled.

https://www.jandy.com/-/media/zodia...6594.pdf?rev=cea4b92504984d719dbb4ce83e14d0bf - Page 29

7.2 DIP Switch Settings for Pool and Spa Combination S1 DIP Switch # OFF ON 1 AUX1= any equipment AUX1= Pool Cleaner 2 AUX2= any equipment AUX2= Low Speed for a two-speed filter pump. Filter pump circuit becomes High Speed. 3 AUX3= any equipment AUX3= Spa Spillover effect- Combination controls only. 4 Heater cool down operates. Heater cool down disabled

https://www.jandy.com/-/media/zodia...6594.pdf?rev=cea4b92504984d719dbb4ce83e14d0bf - Page 45

 

[orphancars]

7.2 DIP Switch Settings for Pool and Spa Combination S1 DIP Switch # OFF ON 1 AUX1= any equipment AUX1= Pool Cleaner 2 AUX2= any equipment AUX2= Low Speed for a two-speed filter pump. Filter pump circuit becomes High Speed. 3 AUX3= any equipment AUX3= Spa Spillover effect- Combination controls only. 4 Heater cool down operates. Heater cool down disabled

https://www.jandy.com/-/media/zodia...6594.pdf?rev=cea4b92504984d719dbb4ce83e14d0bf - Page 45

This for the win!! The water spills over my rock wall, so it could be considered a spillover. I'm cool with that. Thanks for the assist!!!