Latest activity Postings Media About
-
-
PoolGate replied to the thread Leveling pool equipment cost.This is so dependant on your local contractors. It doesn't seem too out of line for current costs though. Do the pool light repair... -
PoolGate replied to the thread Jandy Aquapure PLC1400 Vastly Different than Silver Nitrate Testing.It wouldn't hurt.
-
PoolGate replied to the thread New pool owner, struggling to keep chlorine levels up..Do a proper slam. Get a proper test kit if you don't already have one.
-
PoolGate replied to the thread Jandy Aquapure PLC1400 Vastly Different than Silver Nitrate Testing.The accuracy is around 400ppm so you are close. I would leave it as is.
-
PoolGate replied to the thread Not another VS pump question!.I have no idea what you just said...... But, here is a cost chart for VSP usage.
-
-
-
PoolGate replied to the thread Can not get pH to come down.Add more? I add until the pH test is orange. I also never measure it at all. Just dump until it seems correct. After awhile you'll have...
-
PoolGate replied to the thread Jandy RS4 - dead-ish?.Are you sure you're waiting long enough for it to start? Sometimes mine takes close to 3 minutes or so to start.
-
PoolGate replied to the thread Upgrading a dead Aqualink Z4 to RS.The higher the number, the more things you can control. List out what you want to control and see where that takes you. My guess is an RS8.
-
PoolGate replied to the thread Sand in pool that doesn't appear to be coming out of returns.It could be blowing in from the air. But could also be broken laterals in your filter. Only way to find out is to take apart the filter...
-
PoolGate replied to the thread Jandy Aqualink setup - I messed up and need some help here.Ah WaterGuru ok. Yeah put it on boost 100% for 24 hours and pump running 24 hours. Yes that should control a VSP...
-
PoolGate replied to the thread Jandy Aqualink setup - I messed up and need some help here.Where does that image come from? Just because your SWG is not communicating with Aqualink, doesn't mean it is not working. From the SWG...
-
PoolGate replied to the thread Replacing Zodiac Nature2 Fusion SWG Cell - Additional Considerations.I have never replaced my sensor it is still the original. It reads very close to the drop test. It really isn't a big deal unless it is...
-
PoolGate replied to the thread Identify the green stuff above water line.Make a light chlorine solution and spray it.
-
PoolGate replied to the thread Replacing Zodiac Nature2 Fusion SWG Cell - Additional Considerations.Yeah that's fairly far off. I'd do another k-1766 drop test and go with that reading for the calibration. Make sure you have right at 10ml.
-
-
Loading…
-
Loading…
-
Loading…
