Hey I’m new to the pool and forum thing, if someone could direct me to a previous post I would greatly appreciate it. I currently have the pool set up and about 1 foot of water in the pool.
I leveled my ground, I ended up having to dig 1 foot down to nothing to get it level, wasn’t fun with a shovel and wheel barrow. I added sand and got that leveled out. I got the pool frame up, used a rotating laser level to make sure the frame was level before filling. I started filling, got to about one foot and realized not all legs are plumb. As I try to go around the pool and plumb them up every time I pull one out another goes in. I read somewhere that the pool filling up will push the legs out, but I wasn’t sure if this was correct and I didn’t want to fill the pool all the way to just have to drain it. Any info on this problem would be helpful!! Thanks!
I leveled my ground, I ended up having to dig 1 foot down to nothing to get it level, wasn’t fun with a shovel and wheel barrow. I added sand and got that leveled out. I got the pool frame up, used a rotating laser level to make sure the frame was level before filling. I started filling, got to about one foot and realized not all legs are plumb. As I try to go around the pool and plumb them up every time I pull one out another goes in. I read somewhere that the pool filling up will push the legs out, but I wasn’t sure if this was correct and I didn’t want to fill the pool all the way to just have to drain it. Any info on this problem would be helpful!! Thanks!
Not sure which previous post you were referring to, but I pulled these up for you if it's not too late by now.