Hello, anyone have any experience with the freeze protection (not) activation with a Century VGreen motor? I have purchased a new motor, and was sent a replacement with neither successfully activating freeze protection when temperature drop below 39F. I have troubleshooted including confirming the jumper settings, etc. with no success. At the moment, I have have it set to schedule set A, schedule 1 and the ambient temperature is 35F @12:45 pm (which is up from 24F at 8 am) and the freeze protection is not activating... The 12 hr schedule stopped at 7:30 am. I have reached out to Century and from what I was told they don't provide any customer support to home owners. I purchased the pump from INYO pools, who have been good to work with, but they too are stumped on the issue. Thanks in advance for the assistance.
