AUX port relay connector for Pentair Easytouch

[ClemsonJeeper]

Trying to dig through old threads to find the one that someone found the 2-prong connector that ties into the aux-port relays on the Easytouch panel.

Anyone happen to have that link handy?

I need to hook something up to one of my aux ports (don't need the relay), and would rather spend 50 cents on the connector than 20 bucks on the relay.

This is the part I'm talking about:

 

[Jimrahbe]

cj,

I'm about to step out, but I know for sure it is on this site as I have seen it before.

If you don't find it by the time I get back I'll try to find it and let you know.

Thanks,

Jim R.

 

[Jimrahbe]

cj,

See the last post in this thread... PCB connector for Pentair Easytouch relays 2 pin

Thanks,

Jim R.

 

[ClemsonJeeper]

There it is, thanks. I searched everything I could think of.

I'll put the link here too:

Pololu - 2-Pin Female JST XH-Style Cable (15cm)

 

[ogdento]

The above connectors will work great, but the actual IDC type (punch down/insulation displacement) connector that comes on the relays and the valve actuators is a JST NR series (2.5mm pitch).

The model number for the reddish relay connector is 02NR-E2R, and the black valve actuator connector is 03NR-E4K

Here's a link to the spec sheet...
http://www.jst-mfg.com/product/pdf/eng/eNR.pdf

I was looking for some red ones last week but I unfortunately can't find any in stock

Tom