Search results

I contacted Jandy support and they said it's around 4 years old

Not sure if this helps... I tried Googling a serial number lookup but couldn't find anything.

I just bought the house last Fall so I have no idea...

According to my TF-100 salt kit, my salt is at 3.4-3.6, but according to the SWG it's 2.6. I'm assuming the kit is more reliable, so what can I do to "fix" my SWG?

Thanks! i will add some calcium chloride immediately

Temp is about 50 since it's still chilly here. According to poolmath my CSI is -0.98

Oh I don't know then. How can I find out? pH was ~7.6 a few weeks ago. I've since raised the FC to 12 which makes the pH test inaccurate to my understanding? CYA: 30 CH: 75 (I'm reading this might be the culprit?) CC: .5 TA: 90

I just bought the house last fall but I have the pool plans from when it was constructed in 2001. I don't know if/when it was replastered since According to the plans, gunite

It indeed bubbled. What do I do about it?

Looks and feels like sand, but I have no idea where it could be coming from

There is still dust, unfortunately

FC last night was 13.5, this morning it was 12.5. CYA 30. 0 CC. So I'm assuming I'm done with the SLAM. Anything else I should do before raising the CYA to SWG levels?

It was 18

I did a backwash on Friday and psi is currently at 26. I reckon I have to do another... Is it normal to have to do it so frequently?

FC last night was 7.5. This morning it was 6.5 (tested about 2 hours after sunrise so may have lost a little to sunlight). CYA hasn't come in yet but I'll be adding that as soon as it does. There's a brown "dust" like substance at the bottom of the pool. When I sweep it it poofs up just like...

Thanks! That looks like the best value. Ordered a bag

🤦‍♂️Oops. What's the TFP recommended product and quantity to buy for CYA? Preferably on Amazon

The 7 FC was from last night and I got the same result this morning. But I will confirm again tonight/tomorrow. Can I use 90-92% calcium chloride ice melt to raise the CYA? The water looks pretty decent in my opinion. I can see to the bottom. Can you tell the material from this pic?

Can I use ice melt to raise CYA? The one I have is 90-92% calcium chloride, 4-6% water, 2-3% potassium chloride, 1-2% sodium chloride.

I just received my kit and did the tests. Below are my values: FC 7 CC .5 pH 7.5/7.8 CH 75? I'm not sure how blue it needs to turn. It was a light blue TA 80? Again not sure how red. It was a light pinkish CYA 0? I don't know if I did something wrong here... The solution was clear. Filled the...

Ok so I cleaned my filter grids and replenished the DE yesterday. Suction seems to be good now. Although... the PSI was at 16 after the cleaning and went back up to mid 20s today. Could it just have sucked up a lot of stuff over the day? If I turn it off for a few minutes and turn it back on...

I'm going to try to make a trip out to Walmart today. How many gallons of liquid chlorine do y'all think I'll need for this process to avoid making another trip? Can I turn off the pump at all? I'm trying to be mindful of the energy usage 😖

I ordered the TF-100 Salt kit. I also set the filter to recirculate until I can clean and recharge the DE. Is there anything else I can/should do right now while I wait for my orders to arrive? I've read that the SWG should only be run when the water temperature is above 60F, which probably...

Thanks, so should I turn off the filter/set it to recirculate until I can add DE? Should I do anything else in the meantime? I'm considering the TF-100, do I need the salt version?

I'm completely new to pool ownership. Not sure where to even start, so apologies for my lack of knowledge. I have a saltwater pool which was just opened on Friday. It was very green initially but cleared up a bit after a few hours. However I noticed there was barely a change the next morning. I...