You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
R
Gauge pressure at 5 psi at max speed of pump.
-
R
Which position do I put the valves for main drain off and skimmer off? Vac handle at 3 and then skimmer handle at 12? When I had skimmer...
-
R
Gauge pressure is at like 5 on the cartridge filter, so the pressure hasn’t increased (if it is working correctly). So if hasn’t...
-
R
I guess I could do that other option, but that would mean every night I would have to manually go out to equipment pad to turn offf my...
-
R
So with vac handle at 3 o’clock (turning off main drain) and skimmed handle at 6 o’clock, I may be having 50/50 to vac and skimmer?
In...
-
R
Ok. If the skimmer handle is like at the 5 or 6’ o’clock position what percent is going to each? I guess that is what I am not sure...
-
R
so at what clock positions do you recommend I put the two valves?
I am not sure understand the drawings.
If I have vac valve at...
-
R
With pump at 50% my cleaner has never worked, but it would work when it was at 75% or 100%. Recently I could only get it to work with...
-
R
The vacuum got faster when I completely turned off the skimmer (skimmer handle pointing straight up and vac straight down and pump on...
-
-
R
So I checked the filter pressure and it is like 5.
Photo attached.
I also took apart the aquqnaut per the trouble shooting...
-
R
Yes. I turned them back to where they were. I can check the pressure later when I get home from work. It I wasn’t high when I looked at...
-
R
The water level is a little less than half way up the tile . It is maybe a 1/4-1/3 up the tile.
My bigger issue right now is my...
-
R
Well I searched in forums for similar issue and took apart the tubing to see if something clogged and looked at the vac itself. Nothing...
-
R
The weir door was up because the pump was off when I took the photo. When I did tests turning the main drain and vaccum, the skimmer is...
