Lake Placid's latest activity
-
Lake Placid replied to the thread Help with balance.Stop the dry acid. It adds sulfates. Switch to Muriatic….Your SWG will thank you. -
Lake Placid replied to the thread Pentair Heater Corrosion Issue Help.Heater appears to be bonded correctly as that’s the side of the bonding lug on the Mastertemp. If the rest of the bonding is intact is...
-
-
-
Lake Placid replied to the thread Should I put mesh safety cover on after opening.No issues with adding the safety cover back on if you wish. A number of members perform a “soft open” and leave their cover in place...
-
Lake Placid replied to the thread Not enough Pressure drop for water flow through Intellichem while using Heater bypass, please help.Based on what I can make out of your plumbing, you can add a metering valve where the red line is in the photo. Move the clear...
-
-
-
Lake Placid replied to the thread Step-by-Step Guide.For sure. Show us what you’ve got and we’ll help get you up and running in short order. Might even toss in a few tricks to make it...
-
Lake Placid replied to the thread 3-Way Valve.Please post pics of your setup. Having no valves seems incredibly odd.
-
Yes. No. Yes. Cut the pipes and unscrew from suction and discharge and install 2" high temp unions. 21063-200-000 200-906 2" MIP...
-
That’s not the correct part. You need something like this...
-
To be good at these kinds of projects, a little bit of OCD is our friend. And I will for sure carefully observe the connectors design...
-
Amen. Like the old saying goes, I can always tell how smart someone is by how often they agree with me. 😜
-
That's not true. There are two ways to do it. 1. My way. 2. And the right way. They just happen to be the same!! ;) Heh, heh, heh.
-
Their metals test has a tolerance of 0.3ppm at levels below 0.3ppm 🤣so you likely dont have copper in the water.
-
Lake Placid replied to the thread HELP.You seem to be significantly overreacting to chlorine loss/use. You lose chlorine the minute you apply it to your pool. Whether it be...
