Recent content by Bow_Extreme

Thank You for the information!!

I have a 5' x 8' cement pad poured to set my pool equipment on. I'm looking for ideas to build on this pad. It needs to be tall enough to remove the cover from my Quad 60 Filter System. I want to protect it from the elements and not overspend on a simple element of the pool. I plan on plenty...

I will surely try. Awaiting delivery of all of the pump station components.

I did not operate it. The unit powered up with green light and allowed me to check the life of the cell. Afterwards it would no longer power the on

Howdy, Story First: I picked up a used Pentair SWG system. Power Supply and IC40 Cell were included. I wired the power supply into my panel(Currently wired for 110) and plugged the cell in. I wanted to test for actual life of the cell. The cell powered up and read 20% used thus far. This...

Updates to this. Still working well?

Awesome!! Thank You!!

Thanks for the help!!!

No automation, yet. I like the built in programmer to control the flow rates and reduce the electric bill. If I buy a two speed and a timer control it will be nearly the same amount of money.

I recently acquired a new home and with it came an above ground pool. I'm fairly decent with pool knowledge and used this forum in the past. Pool Specs: 18' x 34' Above Ground Oval with deep end Estimated Gallons: 24,500 Currently running single speed 1.5hp with a small sand filter...

I'm in the process of installing a 27' round ABG pool. The pool wall is 52" tall and my liner is a normal non-deep end 48-52" liner. I'm thinking of adding sand to a portion of the pool to bring the depth to 36". Will this work with the current liner and pool or will I have issues with the...

Bump

I recently purchased a used pool wall which for the most part is in very good shape. The only problem with the wall is the about 1/2 of the pool wall length was partially buried(around 6-12") and when removed and cleaned, the paint was in pretty rough shape. I'm looking at buying primer and...

Re: Filter Type Choice - Backwashing to woods - Also have we I would have stains if it weren't for my water softener system. Yes we have high iron levels in the area.