Latest activity Postings Media About
-
-
Lake Placid reacted to Jimrahbe's post in the thread Pentair intellichlor model ic40 just replaced but it isn't generating chlorine? with
Like.
Paul, Try this test... Set the cell's output to 50%.. Then watch the 'Cell" light.. If the cell light comes on for about 2.5 minutes... -
Lake Placid replied to the thread Pentair intellichlor model ic40 just replaced but it isn't generating chlorine?.Digital Test meters are fine so long as you find a reliable one. However I’d recommend you verify its readings with your own reliable...
-
Lake Placid replied to the thread Pentair intellichlor model ic40 just replaced but it isn't generating chlorine?.I suspect the sediment you’re seeing is more than dust….😱 perform the OCLT and report back. We can go from there. 👍
-
Lake Placid replied to the thread Switching from Stabilized to Non-Stabilized Chlorine Pucks.@fastrunnerdude …this is why you don’t put trichlor tabs in a skimmer. On the left is what’s left of a bypass from a Rheem heater...
-
-
-
-
Lake Placid replied to the thread Pentair intellichlor model ic40 just replaced but it isn't generating chlorine?.Paul, it may be a bad cell….or it may be organics in your pool are using the chlorine your cell produces as fast as it can...
-
Lake Placid replied to the thread Question about using flocculant.I’m still waiting for his mom to come clean it up…that name for his robot has me crying 🤣
-
Lake Placid replied to the thread Bioguard Non-CYA Eco Sunscreen and Clarifier.Yeah but it produces up to 40% clearer water so it must be good! Skeptics….. Of course they include no baseline measurements for the...
-
Lake Placid replied to the thread Turbulence pool filter/oscillating pressure gauge.I suspect the air entrapment is your issue, causing the gauge fluctuation, and pressure readings in recirculate mode. I’d be suspect of...
-
Lake Placid replied to the thread Turbulence pool filter/oscillating pressure gauge.Bleed all air from the system in filter mode…..once bled, turn off the pump and immediately switch to recirculate, restart and verify if...
-
Lake Placid replied to the thread Winterization fail. Cracked skimmer.What James posted is a very good product. JB water weld will work as well especially if you need to repair while submerged. Plast-aid...
-
Lake Placid replied to the thread Floating chlorinator.Add 1 gallon of your 10% liquid daily until your test kit arrives. That should give you the 5 ppm addition you’re looking for.
-
Lake Placid replied to the thread Floating chlorinator.The cal hypo isn’t a must sell at this point. Just be aware it will increase your calcium levels every time you make an addition with...
-
Lake Placid replied to the thread Any idea on how to tackle this leak?.Yes….although regular seals will work just fine. https://www.inyopools.com/Products/00101352069707.htm
-
-
Loading…
-
Loading…
-
Loading…
