Impeller Replacement

[Tanya1113]

Good evening everyone,
I have been searching for hours for an impeller replacement for my pool. I am no expert at parts (only balancing water) now, I cannot seem to find the same impeller I have. My question is are they universal? I have a Century motor, the part # on the impeller is 70003 unless my eyes are bad, and it's a grayish/beigeish color. If anyone can help or have suggestions, I would greatly appreciate it.

 

[JamesW]

Picture of the pump?

Does the pump have a model number (not the information from the motor label)?

 

[Tanya1113]

 

[Tanya1113]

View attachment 442070

 

[Tanya1113]

Picture of the pump?

Does the pump have a model number (not the information from the motor label)?

I have a model number for filter but not pump, they would be different right?

 

[Tanya1113]

 

[JamesW]

I don't recognize the part or the pump.

Can you find part numbers on any other parts?

 

[Tanya1113]

The only number I see is 70003. Cannot find anything else.

 

[JamesW]

There should be part numbers on these two parts.

 

[JamesW]

What filter do you have?

 

[JamesW]

This is the closest part I could find.

Part number 70004.

If you can find other information, or part numbers, that would help.

Astral Pool or Hurlcon swimming pool pump impeller suits E, TX, BX, CX, CTX & - Direct Pool Supplies

Pool pump impeller to suit AstralPool / Hurlcon / Aquatight Pinnacle E170, E230, E290, TX 1.5, TX 2.0, BX, CX180, CX240, CX280, CX320, CX400, FX190, FX250, FX290, FX340 & FX520. Australia wide delivery. Buy Online Now.

www.directpoolsupplies.com.au

 

[JamesW]

I found a part number 70003, but it goes to an O-ring.

The pump and filter look like they came as a set, so the filter will probably be the same make as the pump.

 

[Tanya1113]

Thank you for all your help thus far..I have contacted dealer..3rd party of course they are hunting down receipts of course b/c they have changed owners. I searched for numbers on all parts of pump no luck at least you have gotten somewhere and I am going to start there and keep researching...thank you for all your help

 

[1poolman1]

View attachment 442070

Thank you for all your help thus far..I have contacted dealer..3rd party of course they are hunting down receipts of course b/c they have changed owners. I searched for numbers on all parts of pump no luck at least you have gotten somewhere and I am going to start there and keep researching...thank you for all your help

Appears to be an Aqua-Flo pump. What is wrong with that impeller?

 

[Tanya1113]

Appears to be an Aqua-Flo pump. What is wrong with that impeller?

The threading is stripped. Not attaching to motor.