- Sep 12, 2023
- 153
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
new build and have the Pentair TA60 sand filter. Until today I had not installed the filter gauge. I did buy the really nice one of tftestkits.net
Once I installed I ran, before backwashing, and with the diverter valve set to run through the HP I had just shy of 10psi at 40gpms. When I bypassed the HP completely I have about 2psi at 40gpm. When I drop my pump speed to my normal 20-25gpm the gauge doesn’t even register.
Is this normal?
Pics attached are the pressure read at 40gpm with the HP bypassed entirely.
Once I installed I ran, before backwashing, and with the diverter valve set to run through the HP I had just shy of 10psi at 40gpms. When I bypassed the HP completely I have about 2psi at 40gpm. When I drop my pump speed to my normal 20-25gpm the gauge doesn’t even register.
Is this normal?
Pics attached are the pressure read at 40gpm with the HP bypassed entirely.