Recent content by peterrietmann

No rebar, uncovered

Hi I am repairing cracked pebble tec with E-Z patch 9 pebble repair on my spa which had a crack and was leaking water. I cut pebble tec around the crack and removed it , the surface underneath was very sandy. I used a demolition hammer to gently probe and remove the sandy loose areas. My...

I currently have a pentair control panel inside the house that controls the entire pool pump, spa, solar , heater and it is connected to a pentair I9+3 out by the pool equipment. I would like to be able to control all of these features over a web app on my phone. what do i have to do to...

If your pool lights haven't been touched since 1997 , there is a good chance you have no chance to get the screw out of the fitting. I tried to change my halogen lights out and both light fixtures the screws had to be drilled out. Hope you have better luck.

Just went through exactly the same with two Pentair lights, one in the spa which i could empty , the other in the pool. Both screws would not loosen, eventually Phillips head was stripped so used a screw extractor bit that eventually took the head off the screw. In the spa i could use impact...

I ended up getting the hose replacement kit, if it leaks again in the future then trivial to repair. Pentair 353020 White Quick Disc Hose Replacement Kit Pool/Spa Pump and Cleaners

Hi Have exactly the same pool lights , did the Sunlite 40711-SU 75MR16/FL/12V Halogen MR16 38° Flood Light Bulb 75 Watt, 12 Volt, Bi-Pin Base (GU5.3) work out as expected in 120V ? Just tried to order and can' t ship to California. hmmm, apparently they are banned here.

How did it turn out ? Did you replace all three lights? Any issues? , considering the same upgrade Pooltone replacement kit.

Hi Texas Splash Here are some further images that show the whole pipe from side and above, I am not sure with this fitting if I simply unscrew at the pump , whether the thread above will turn or use multiple wrenches or if i have to cut the pipe and redo ?