Recent content by jaxesn

I found a few other threads regarding this topic so if missed a pretty obvious solution I apologize for the duplicate. My skimmer has a gap on the inside. I *think* the builder probably should have used a collar extension but instead used a tape.... This tape is 1) gross and 2) makes it hard to...

I ended up cutting out all the red valves and replacing them with diverters. I added actuators to each one. I was not able to get the Omni control two actuators on the return side when switching between spa and pool mode or when enabling the spillover. To make it work I spliced the actuators on...

It seems with the Omni system I can't do exactly what i was thinking by adding actuators on the individual returns. The spa vs pool mode settings only seem to support selecting one valve to control. I did go ahead and replace the tanning ledge return with a jandy and installed an actuator on...

Ha! Those red valves seem to get a lot hate! Funny thing is I have a box of stuff the builder bought but didn't use and there are 2, 2-way jandys in there... That's exactly what I was thinking. Any reason controlling the 3 different actuators wouldn't work like I want? I also seem to noticed...

Brand new pool owner, been reading a lot of posts on here trying to understand all of this stuff! My pool has a spa and tanning ledge, both will spillovers. My system is powered by a Hayward Omni. It is saltwater with a salt cell/generator . The filter is a cartridge filter. There are 3 suction...