Brushman's latest activity
-
Just be aware: while LP happened to use the same color of wire for his jumpers to the pins, they are not interchangeable. The original... -
Yes, both. Most would just wire nut wires together. And that will be fine. But, for example, I took the trouble to solder all my garden...
-
Brushman replied to the thread 10 Day Old IC-40 Just Went Dark.Me, overthink? You, overdo? No way. 😆 Seriously, I'm really grateful for the help. And yes for sure, I usually overthink and yes...
-
Update. The wire nuts I linked above are supposed to fit up to three #10 wires. That should probably work. But before you use one, and...
-
Brushman replied to the thread 10 Day Old IC-40 Just Went Dark.All's clear, you joined your reds with reds, blacks with blacks, and then it's the blues that both tie in (one to the reds, one to the...
-
Brushman replied to the thread 10 Day Old IC-40 Just Went Dark.Eureka! 👍👍👍
-
Brushman replied to the thread 10 Day Old IC-40 Just Went Dark.Speaking of beer, I owe y’all several.
-
I did not perform the "LP Jumper Approach" fix. Nor did I illustrate the fix I used. Ignore what I did. Do what LP did, as you state you...
-
Dirks solution above is actually less work and more streamlined than mine. Where he shows the incoming red power leads wrapped with the...
-
Brushman replied to the thread 10 Day Old IC-40 Just Went Dark.LP many thanks, those two sentences are short and sweet and make me realize that there's possibly a step involved here that I don't have...
-
-
-
Brushman replied to the thread 10 Day Old IC-40 Just Went Dark.I've gone back and re-read multiple threads to try to avoid asking, but to be sure, I'm stuck asking anyway ... First off, this...
-
-
-
Here's some more data for you: and... The IpH specs are telling us that the IC can pull up to 7.3A (probably less for an IC40, but...
-
I think I used 12 gauge marine grade wire. 😂...definitely overkill but I had it leftover from when I rebuilt my boat, so I figure it was...
