Will Intex pump swap easily with Funsicle quickset

[mroarb]

I know this group is more geared towards pool maintenance and chemistry and I’m getting better at all of that. That said, I have a small 10’ by 31” quickset pool from Funsicle. I’ve had it up for about a month and am feeling good with where it’s at clarity/chemistry wise. My pump is only a 330gph cartridge pump. I would like to replace it with a 1000 or 1500gph. Intex has the RX1000 readily available on Amazon for much less than the Funsicle version on their own website. Has anyone swapped the two and if so do I need anything special to connect? Are the hoses universal? Thanks

 

[Mdragger88]

Can you post a link to the pool you currently have or post a pic of the connections

 

[Mdragger88]

Fyi-
It looks like polygroup makes funsicle pools - I have successfully used intex hoses & equipment with polygroup pools in the past.
albeit it was a larger pool.
The tiny pools tend to have smaller hoses so you may need some adapters alternate fittings.

 

[mroarb]

It’s this one!

Robot or human?

 

[Mdragger88]

For the rx1000 the hoses should be the same as they appear to be 1.25”

If you get a larger pump/filter (like a sand filter) with the big 1.5” hoses that screw on You’d need these

Amazon.com