- Jun 5, 2024
- 4
- Pool Size
- 14000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Good morning!
Our pool opened end of May, has since flooded with mud twice- this last time, the only remedy was to drain it and start over. We bought a pump and rented one; and, spent over 12 hours draining and scrubbing. Fast forward, our pool is now filled AGAIN, and I'm trying to get it back to what it was before the mud flood.
We shocked 2 days ago, added 6 bags of salt yesterday, and this morning when I tested, there was absolutely zero chlorine and PH is 7 or below. CYA of course is zero. The salt cell still shows red low level, but that may take 24 hours?
Do I do the SLAM process? Any insight will be EXTREMELY appreciated.
Our pool opened end of May, has since flooded with mud twice- this last time, the only remedy was to drain it and start over. We bought a pump and rented one; and, spent over 12 hours draining and scrubbing. Fast forward, our pool is now filled AGAIN, and I'm trying to get it back to what it was before the mud flood.
We shocked 2 days ago, added 6 bags of salt yesterday, and this morning when I tested, there was absolutely zero chlorine and PH is 7 or below. CYA of course is zero. The salt cell still shows red low level, but that may take 24 hours?
Do I do the SLAM process? Any insight will be EXTREMELY appreciated.