Pentair IntelliFlo VSF 3 - power outage, now three flashing lights

Jump to latest Follow Reply
T

Texas Ranger

Active member
Jul 2, 2022
34
Texas
Experienced a brief power outage, really a flicker. Noticed schedule was showing running on my app, but pool equipment wasn’t. Checked pump. The “connect”, “on/stop”, and “quick clean” buttons are all three steadily flashing blue/purple together. How do I reset this pump to get it back online again? Main panel is showing “no comm” and app is show “communication lost”. Leads me to believe internet issue.

I turned the breakers off then back on with no results.

Thanks!
 
Last edited:
TR,

Check out page 22 of this manual..


Not sure that will help, but it should be a start.

It appears that the pump is trying to display a fault number. The problem is that you need the Pentair app or an automation system or an optional display to see what the code is. (What could go wrong with that idea?) :mrgreen:

How are you controlling the pump? Wi-Fi, Blue Tooth, or a Pentair automation system?

This is a new pump to most of us so it will be interesting to see where this thread takes us.

Also page 12 Device Setting, then Device reset...

Is the power to the pump connected to a surge protector?


Thanks,

Jim R.
 
Jimrahbe said:
TR,

Check out page 22 of this manual..


Not sure that will help, but it should be a start.

It appears that the pump is trying to display a fault number. The problem is that you need the Pentair app or an automation system or an optional display to see what the code is. (What could go wrong with that idea?) :mrgreen:

How are you controlling the pump? Wi-Fi, Blue Tooth, or a Pentair automation system?

This is a new pump to most of us so it will be interesting to see where this thread takes us.

Also page 12 Device Setting, then Device reset...

Is the power to the pump connected to a surge protector?


Thanks,

Jim R.
Click to expand...
 
Thanks, JR.
I finally remembered I had a main breaker in the garage apart from the sub panel and breaker on the EasyTouch. I reset the breaker and the pumps came back online. Then, the EasyTouch has no display. Flipped breaker off for several minutes, turned back on and all working just fine. These are very touchy systems…
 
  • Like
Reactions: Jimrahbe and JamesW
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply