Lumiere Technologies - AK600 Solar Pool Ionizer - Thoughts?

Standard copper ionizer nonsense. Not new in the slightest. It is not useful in a pool unless your goal is green hair and stained pool surfaces.
 
Why even buy a copper ionizer?? What’s the point of wasting the money and minuscule electrical usage. If anyone wants copper in their water, simply buy and add copper sulfate to the water. Bring the concentration up to about 1ppm and you’ll be all set....no need for anything additional to be added to your equipment. And, since copper is “forever” the only time you lose it is by backwashing or splash out or rain dilution with overflow. There really is no cheaper or easier way to add it.....

Buuuuuuut (and you knew there would be a “but”) .... you will now have a metal in your water at a concentration very close to scaling. SO if you ever have to increase your FC level or if your pH gets out of control, you will almost definitely get staining. Copper staining is reversible, but typically requires a very expensive chemical protocol to remove it and then some water exchange to lower the concentration.....of course, once the concentration is lowered, you lose much of the benefit that copper offers as an algaecide.

(As you can tell, I’m playing Devil’s Advocate...)
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.