Does anyone have any diagrams to set this up? My pump has the speedset control which is unhooked to run the iqpump01, both are 240v. I have 2 aux relays. The electrician did not wire the truclear with the pump and is wired standalone. What is my best option to make them communicate? Thanks for the help!
Jandy pump 240 to tru clear 240 in junction with iqpump01
- Thread starter Tacpool
- Start date
- Jul 21, 2013
- 64,851
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Connect a 4 wire cable from the TruClear RS-485 connector to the RS-485 connector in the pump the IQPUMP01 is connected to.
From Jandy TruClear SWG - Further Reading
The Jandy TruClear chlorination system with Firmware Revision F or later, can monitor the state of the Jandy Variable Speed Pump so that the TruClear does not operate if the Jandy Variable Speed Pump is not running.
A four wire RS-485 cable is connected between the TruClear Power Pack and the Jandy VS Pump to ensure that the chlorinator only operates when the pool pump is running. With this connection no timer for the TruClear is required.
Connect a 4 wire cable from the TruClear RS-485 connector to the RS-485 connector in the pump the IQPUMP01 is connected to.
From Jandy TruClear SWG - Further Reading
The Jandy TruClear chlorination system with Firmware Revision F or later, can monitor the state of the Jandy Variable Speed Pump so that the TruClear does not operate if the Jandy Variable Speed Pump is not running.
A four wire RS-485 cable is connected between the TruClear Power Pack and the Jandy VS Pump to ensure that the chlorinator only operates when the pool pump is running. With this connection no timer for the TruClear is required.
So basically I just need to run the 4 wires from the extra outlet on the tru clear and mate them with the pump where the iq is hooked into. Correct?
- Jul 21, 2013
- 64,851
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I am not sure what you mean by "extra outlet" on the TruClear but it seems you have the correct idea.
For more help show us pics of where you will make the wire connections.
I guess I meant the outlet for the 4 wire that looks similar to the chlorinator line so i guess there is only 1 haha. So i got it wired with the 4 wires and now the screen has a # sign on the true clear, i assume that means automation? I wont see anything diff on the app it will just now cut on and off w the pump correct?
- Jul 21, 2013
- 64,851
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
