I'm closing tomorrow. I just tested my water and FC was below 1/2 SLAM level so I added a quart of chlorine to get it back up to 1/2 SLAM (8 ppm). How long do I have to wait after adding the liquid chlorine to add the polyquat? Since its rather thick, is it best to dissolve it in a bucket of water and pour it all around the pool or is it better to just pour it around the perimeter and brush after adding it.
How long to wait to add polyquat after adding chlorine
- Thread starter ba67
- Start date
- Jul 21, 2013
- 64,855
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Wait 30 minutes after adding chlorine for Polyquat 60.
Just pour the Polyquat around the pool and let the pump mix it fir 24 hours or as long as you can.
Just pour the Polyquat around the pool and let the pump mix it fir 24 hours or as long as you can.
