Help!!!

[Missg65]

My on/off button may be going out. I have to press it several times for it to come on. Can this be replaced? Hoping it can I can't afford the whole set up right now. The pump and filter work fine. Just having trouble with the on off switch (button) I'm hoping someone can help me. I haven't been able to find any information. Anywhere.

 

[mknauss]

Welcome to the forum!
Can you provide us what brand, model, etc this equipment is?
I suggest you read through Pool School - Trouble Free Pool and even look at a few of our videos TFP-TV - Trouble Free Pool

 

[ajw22]

That looks like an Intex pump. The button failing is a common problem.

Intex SF80110 - Display shows pump in power save mode "Period".

My Intex SF80110 pump isn't turning on. I have power to the pump but the display is showing a red period (power saving mode). The power button is hot to touch. I don't know if the pump could be overheated or what. It was running fine and then I shut it off to do a backwash and now I cant get it...

www.troublefreepool.com

Intex SF80110-2 Pump/Filter Timer Bypass issue

Moved from here .. Intex SF80110-2 Pump/Filter Timer Bypass Mine is stuck in Power Saving Mode. Only shows a "period" on the display. Power button doesn't do anything, and if I press the lock or timer button I hear three beeps then nothing happens. :( I have the same problem, does anyone have...

www.troublefreepool.com

Intex Pump SF70110 On Off Switch

Hi All, Does anyone know where I can get a replacement on/off switch for an Intex SF70110 pump with timer? The internals on mine have gone bad and you have to hold your mouth just right ;) to get it to turn on, and stay on. Intex is no help. I found a post where a member said it was a Haywood...

www.troublefreepool.com

Intex 16" Sand Filter Pump (Model SF60110-2) - Bypassing the digital timer and integrating into the smart home.

Problem: I got the Intex 16" Sand Filter Pump (Model SF60110-2) to replace the small Intex Cartridge pump that came with our 18' above ground pool. The outgoing pump's schedule was controlled by a zWave outdoor smart plug and life was good. Well... the new sand filter pump is equipped with a...

www.troublefreepool.com

SF70110-2 Intex sand pump - only beeps when buttons are pushed, doesn't show timer or run - please help!

Pump suddenly stopped working! It shows only a red dot light. If I press power, it does nothing. If I press power and lock or timer at the same time, it beeps three times. That's all it does. Any suggestions? I have unplugged several times, hit the test & reset button several times, I've left...

www.troublefreepool.com