Help Identifying Above Ground Pool Manufacturer

[MScottPaperCo]

Can anyone please help me identify the company that made my above ground pool. I'm a fairly new pool owner and am interested in replacing the old top rails but cannot seem to find a website for this company. The posts are stamped with "New Era" but I am thinking they may have gone out of business? Also my pool does not have top caps, just rails, which i think is rare based on my search. Photo attached.

 

[ajw22]

@PoolguyinCT is often good at identifying pool manufacturers

 

[kimkats]

I will also ping @InyoRob as he is very good at this kind of thing also.

 

[MScottPaperCo]

I can post a picture of the top rails too if that would help.

 

[kimkats]

I bet that would..... also are there any letters/numbers/anything UNDER the top caps?

 

[MScottPaperCo]

I looked below a few of the top rails and didn't see any markings at all, but I will take another look later and get that photo.

 

[kimkats]

I mean turn them over and see if there is a stamp on anything.

 

[InyoRob]

Look for numbers on the underside of any of the parts. Also, post a picture of the top cap, top rail, and top plate. This might help identify the pool.

 

[kimkats]

Look for numbers on the underside of any of the parts. Also, post a picture of the top cap, top rail, and top plate. This might help identify the pool.

Hi ROB! How do you like the new TFP??

This is my go to guy for this kind of thing. He has SKILLS for this kind of thing!

 

[MScottPaperCo]

Haha thanks guys, when the weather gets better I'll take one of the rails off and see if there are any stamps or anything, nothing seems to be visible from the bottom. I have attached a photo of the top rails, the joint in the photo is typical around the pool, there are no top caps.

 

[kimkats]

How in the world do you get that rail off?? Yeah if it is how I think it is...........................burrrrrrrrrrrrrrrr it can wait!!!

 

[MScottPaperCo]

It seems like each rail has two screws on each end that connect them to the posts some how. If I can get one off I'll post the underside.

 

[InyoRob]

I'll do a little research and see what I can find out about this pool.

Kim - The new site looks great. Is there a way I can receive emails when I'm tagged in a thread?

 

[kimkats]

@InyoRob and anyone:
-click on your name on the blue bar beside the inbox-click on it-it should open a pull down box
-click on preferences
-check the boxes by what you want to happen with all kinds of things.

 

[MScottPaperCo]

So I found where the stamp is on the top rails, see the photo. Looks like that has all the info, I found the company online looks like it's from canada?

 

[kimkats]

That is going to help @InyoRob SO much!

Can you type out what it says please? There is a slight shine that makes some of it hard for my old eyes to read.

 

[MScottPaperCo]

Some of it is in French, but the important parts seem to be vogue pool products and design michel dallaire design industriel. I took another photo that might be easier to see.

 

[kimkats]

Hey I can read that one! THANKS!

 

[InyoRob]

Perfect. That's a Vogue pool. I'll see if parts are still available.

 

[MScottPaperCo]

Thanks guys, I ran a search and it looks like the website for them is voguepools (.com not sure if links are allowed)? Some search results say the company changed names to Trendium a few years ago?