Footprint considering pavers for 14' Intex Ultra Frame?

[nina_online]

Hi,

Could someone please tell me the "footprint" for the 14' x 42" ultra frame?

Also, I believe I read regarding setting pavers, that the feet splay out when filled with water? So you have to set pavers farther out that than you think?

So I really need that "splayed out" footprint.

Thanks,
Nina

 

[ike0069]

The legs do tend to want to go out a little when filling but this is not really what it "should" do.

I set up and filled my pool this year and had a support slip off the footing. I had to partially drain and jack up the leg to re-set it. I suggest getting a rope or something you can get tight and wrap around the legs before filling which is what I ended up doing after my initial fill. The old Intex pools used to come with a rope, but now they say it is optional. I personally think is should be done on every installation.

 

[ikorodu]

i have a best way 14ft by 42in pool. I set my 2ft sq pavers in a circle to match the frame, easier to do this when you have assembled the top ring of the frame, I found.

The outside diameter of my pavers is around 16ft.

Hope this helps!