Aquabot S2-40i issues

[TaraVB]

Hi,
We have a Aquabot S2-40i that is not working. When you turn on the power supply, and click small pool the lights start blinking. My husband thinks it’s a power board issue. Does anyone have or knowwhere to find a schematic for the power board. Or maybe any useful tips if you experienced the same issue.

Thank you

 

[thebombardier]

As far as I know the power supplies are not serviceable. Once they die, you just replace it. That being said, there is not a lot to go wrong with those units. It's usually either the motor or power supply, and the whole system needs to be working for anything to turn on. Whether the motor is dead, the power supply is dead, or there's a short in the cable, it will give you more or less the same symptoms of blinking lights and no movement.

You can diagnose a bad motor motor by disconnecting it from the cable, then grabbing a multimeter and checking if there is continuity between one of the cable connection leads and the armature (shaft) of the motor. If there is continuity, the motor has water in it and you need to replace it. If not, the motor is fine and you have an issue with their the cable or power supply. Only way to diagnose the power supply is hooking the unit up to a new one and see if it works.