Hey guys opening my pool for the season and everything was fine until I turned on pump today. It was working yesterday. I hear the relay click and pump doesn’t turn on. I changed the relay because I had a spare, same issue. I then see a “communication error” displayed on screen but that’s all it says. If I turn off breaker sometimes that error will show other it will not. Any ideas?? Possible board I’m thinking?
Aqua plus pro logic gold line HELP!!
- Thread starter Bski224
- Start date
- Jul 21, 2013
- 64,749
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Do you have a multimeter and know how to check voltages?
Check the pump circuit breaker.
Check voltage at screws 1 & 3 of the pump relay to see if you have power into the relay.
Check voltage between L1/L2 at the pump or at screws 2 & 4 of the pump relay.
Check the pump circuit breaker.
Check voltage at screws 1 & 3 of the pump relay to see if you have power into the relay.
Check voltage between L1/L2 at the pump or at screws 2 & 4 of the pump relay.
