I had this pool for 2 weeks, I paid a construction guy to shovel off the grass and level my ground, he used a board and a level, however when the pool was filled there is a pretty much exactly one inch difference. It's level for sure on the width but the almost 10 feet length was missed a tiny bit. I'm wondering if this is an acceptable incline, as I fear trying to correct it may make the other side out of level instead because it's such a small margin. It's hot here but not terrible at 83 F or so but humidity is 100%.
9 10 x 6.7 bestway steel pro, one inch difference in level?
- Thread starter marcoug
- Start date
- May 3, 2014
- 62,651
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum.
One inch should be OK -- review How to level above ground pool - Further Reading
One inch should be OK -- review How to level above ground pool - Further Reading
I would be interested to see what the measurement is in a few months once the ground has had a chance to settle/compact under the weight. It will all depend on how much ground was disturbed vs left virgin. But you should really be fine.