diving board

Hi, we’re currently redoing our 9’ in-ground pool and patio and there’s an old base for a diving board (see pic). We ideally want to keep it (we’re grandfathered in from a code perspective) but am not sure if we just need a new springboard or a new base as well. The patio guys are asking what...

Hello, I had a diving board jig put in during deck pour and my PB insisted that 3 or more inches stick out. The jig has four 6 inch bolts connected by rebar (see attached pic). I recently read diving board instructions that state the jig bolts should only have 1.5 inches showing out of concrete...

My swimming pool was built in the 1970s old but in great shape. The diving board is the issue it’s an old fiberglass one the box is fiberglass and it’s cracked. It has 4 studs. I want a diving board that works. Is there anyway it’s still made or if I could one that’s compatible or aftermarket?

Hi there! My name is Kendall and I was recently just hired as a Head Pool Manager at a private swim club. The club manager and I looked at some things around our facility and noticed that the diving board was damaged. I don't know what kind of diving board is installed, but I believe it is an...

For those who have the SR SMITH Flyte Deck II Dive Stand, can you please tell me does it have any movement to it or is the board completely rigid? Thank you!

My 6' diving board slightly cracked on memorial day weekend. It's an INTER-FAB which has been bought out by SR Smith. The issue I'm having is that my old board has 10" spacing between the 2 bolt holes and it's much harder to find. Where as the 12" bolt spacing board is easier to find and...

Some rocks have minerals like iron that stain when those minerals are exposed to chlorine / water . We replaced out jump rock with a dive platform to solve this . But I’d like to attach a diving board to the platform . I wonder if that’s possible

What started as a quick bolt replacement quickly turned into hours of slamming a hammer at things and now I’m desperate...The bolts in my diving board seem to be rusted into the board it’s self and no amount of force can make the things come out. While researching I couldn’t find any board with...