Hey guys. Just wondering if any of the epoxy filler are worth doing and last a hard winter. I have white marble decking. Beautiful but good lord it is not very durable. It is set on a 2 inch slab to avoid settling in sand. Anyway, we have quite a few cracks here and there, along with corners crushed. I’m was going to try a product to fill them in but wondering if anybody had any experience.
Marble decking cracks
- Thread starter jrsmith25
- Start date
- Jul 21, 2013
- 64,776
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Show us pictures of your decks cracks and chips and it may get some ideas flowing.
What product are you going to try?
What product are you going to try?
Here are a few. You can see some of the veins which obviously are OK. Put my hand in one for scale. Worst case the crack is probably max 1/8” but mostly 1/16 or smaller. I believe the fault is mostly on me after the first season I used a pressure washer on low pressure and caused a lot of this.
I don’t have any specific products in mind. Just saw a ton online which I assume are all probably ineffective long term.
I don’t have any specific products in mind. Just saw a ton online which I assume are all probably ineffective long term.
