Good afternoon TFP,
Good news. I just received my new TF-Pro test kit and it’s glorious.
Bad news. Pool chemistry not ideal. Just completed my first round of results (not sure if they’ve uploaded to my signature).
My plan is to add recommended 10% NaOCl, 31.45% MA, and 5# cyanuric acid (sock method). Does this sound reasonable? Retest again tomorrow and adjust chlorine and acid accordingly? Appreciate the community’s support and patience. Thank you in advance.
Good news. I just received my new TF-Pro test kit and it’s glorious.
Bad news. Pool chemistry not ideal. Just completed my first round of results (not sure if they’ve uploaded to my signature).
- FC: Did not register pink with addition of R-0870. I added a second scoop. Still no pink. Safe to assume I have no chlorine. Pool Math recommends I add 92oz 10% NaOCl.
- pH: ~8.0. Pool Math recommends I add 38oz 31.45% muriatic acid (to get to 7.6).
- CYA: Black dot never faded, CYA < 30, maybe 0? Solution did get cloudy.
- TA: 160. Need to lower pH.
- CH: 150. Only need 67 pounds of calcium chloride We have hard water here; I don’t intend to freak out until the community says I should.
My plan is to add recommended 10% NaOCl, 31.45% MA, and 5# cyanuric acid (sock method). Does this sound reasonable? Retest again tomorrow and adjust chlorine and acid accordingly? Appreciate the community’s support and patience. Thank you in advance.