william13's latest activity
-
Wwilliam13 replied to the thread Pool lights.BTW, I think I have come to the conclusion that my only option is to buy 3 new "light engines" from somewhere. Seems as though there...
-
Wwilliam13 replied to the thread Leak in a bad place I think.Regarding the intake side of things. If I add union to intake and use a sweep is it likely that this will align with the valve or will...
-
Wwilliam13 replied to the thread Leak in a bad place I think.Looks like this comes down to the question of an inch! I better sharpen my pensil!
-
Wwilliam13 replied to the thread Leak in a bad place I think.Looks like I will need 2 inch slip and spigot for each side then use slip and slip to connect.
-
WI would use the sweep 90 unions and a sweep 90 for the discharge to make the full 180...
-
Wwilliam13 replied to the thread Leak in a bad place I think.Regarding the sweep for the inflow, do they align precisely like the 90 degrees do as I try to connect to the Valve. Regarding the...
-
Wwilliam13 replied to the thread Leak in a bad place I think.Understood and like. Thank you. Is there any fluid mechanic reason to add any pvc height to this plan or can I just go with two...
-
WThe Amazon link I provided are the High Temp unions. I would move the pump…pvc is relatively cheap and pretty easy to work with
-
Wwilliam13 replied to the thread Leak in a bad place I think.TY for the clarification. There are a few different parts here. I just need the top one right?
-
Wwilliam13 replied to the thread Leak in a bad place I think.If I have to disconnect the pvc with threaded end and add a union and if I consider putting a union on other end then maybe I should...
-
