baundy's latest activity
-
what is the temperature of your water? Sometimes that can trigger the low salt light even though the salt level is perfectly fine -
baundy replied to the thread Second Week Ever Testing - Next Steps?.The temperature was at 78 degrees when I was out there a few minutes ago and the low salt light was on.
-
baundy replied to the thread Second Week Ever Testing - Next Steps?.No worries! I appreciate all of the help and feedback!
-
baundy replied to the thread Second Week Ever Testing - Next Steps?.What production rate (not sure if that's the right term) should my SWG be on? Right now it's only at 2% because my chlorine had been...
-
baundy replied to the thread Second Week Ever Testing - Next Steps?.My testing kit showed 3400 ppm (assuming that I'm doing it correctly, haha). The SWG does have the Red light on indicating that the...
-
You got it! Let us worry about the water chemistry. Let Pentair find new and interesting ways to sell you new expensive parts. It's...
-
Don’t add more salt unless your SWG is indicating low salt. I believe you mentioned you’re at 3400? That’s enough for my SWG IC-60 to...
-
+1. 3000 to 3200 is enough for ICXXs. 3400 is wiggle room for the spring showers to dilute it a little with overflow.
-
That’s a good point @Newdude I’m at 3000 right now and it’s working fine.
-
baundy replied to the thread Second Week Ever Testing - Next Steps?.Thanks to everyone for the help. Signature has been updated and completed the rest of the items for setting up my account. So, where...
-
As your CYA increases, the FC must increase proportionately to match, to sanitize at the same level. All lines on this chart are...
-
Why are you under the impression that 7.5 FC is "high"? With a "55" (actually 60) CYA, the FC should range between 4-9, with 3 at an...
-
This is what it has on it. Put acid in your cell, every 3 months, whether it needs it or not. :roll: There's your proof they...
-
baundy replied to the thread Second Week Ever Testing - Next Steps?.My SWG Manual recommends 2.0 to 4.0 ppm and a CYA of 30 - 50 ppm. So they are both high according to the Manual. Also, I'm new.
-
baundy reacted to YippeeSkippy's post in the thread Second Week Ever Testing - Next Steps? with
Like.
1. To lower my TA, reduce the pH to 7.0 to 7.2 with acid and then aerate to increase pH. Is this muriatic acid? If so, how much...