Search results

I got my call too this morning from Taylor and a email yesterday, we will just have to wait and see what happens.

Now thats the way it should look :-D Great work..

I am still thinking if the bottom is that dirty where it leaves a clean path after the Rover that filter bag can get clogged yery fast and not push the water through the filter bag like it should, I have one too and love it but I also dont expect it to pick up everything one the bottom of the...

If your pool bottom was really dirty it could be that the filter bag already needs to be cleaned out, it will filter out debris up to 2 microns.

Ours is a AGP 15x30, it has a control box that you can set the time it goes in each direction(in seconds). We have ours set at 30 second, when it comes to a wall or steps it will stay there and then go in the opposite direction when the time tells it to go in the other direction. I was sort of...

I would go with the Pool Rover Jr if it were me and save the $100.00 for something else.. Aquabot Models The Rover Jr and the Rover use the same parts for the most part including the motor so you are not gaining any more power at all, the main difference is the Rover has a longer electrical...

PoolRover Jr here and it works great..

One quick question, how fast will a pool with steel walls corrode using a Saltwater Chlorine Generator?? I assume that they are not recommended for above ground pools??

It took me almost 2 weeks to do the conversion. Most people get theirs done in around one week, I have a lot of trees and hence had a bunch of leaves in the bottom that did not help matters at all, the chlorine was being used up pretty fast with both the bac and organic material. I did start...

Thanks for the complements guys and gals, I worked on it pretty hard to get it changed over but it was well worth it, I think my chemical bills per month now are going to be around 25.00 or so a month as opposed to at least 60 to 70 using Bac.

You can also get a piece of pvc pipe and split it length ways and fill the halves with some good silicone and put the halves back together over the splice and tie them together, this works good also.

I agree with you DrC, the King George is a VERY NICE POOL and maybe the best AGP pool on the market today? I hope that ours will give us 10 to 12 or so years or service, I hope more lol. If the KG is still being made at that time when we need a new one I will surely consider it as a replacement.

Fantastic Pool Dave WOW I just had to put one more wow in there..

I went to Home Depot looking for the rubber shower pan material and they were sold out of it. Anyway I looked in the flooring dept and found some black vinyl carper runner for 1.60 a foot I think its around 30" wide, I got 3' of it and fit the ladder perfect :-D I saw some at the pool store...

We sunk ours in the ground 2 feet, the dealer(Bonnie And Clyde's) said it would not void the warranty. This is a pict right after we had it installed.

I am so glad that we made the conversion to Chlorine(bleach). Chlorine gets such a bad rap because people do not watch their Combined Chlorine Levels. The twins and wifey say no burning eyes at all and no skin problems :-D

I just purchased the Pool Rover Jr last month and cannot say anything bad about it at all. Well I guess that I can say one negative thing about it and that is the electrical cord needs to be un-wound every now and then but it is just a small thing that u will have to deal with any of the...

I just got a new in the box T101P off off of Ebay for 41 bucks including shipping :-D .

I have the Intermatic HB31R and it is really not made to last more than a year or two in my opionion I am looking at the Intermatic T101P and will just hard wire the pump to it. Oh by the by, thanks for the feedback.

Ours is sticking and not doing the on and off thing anymore, bear in mine that this is for a AGP. I am going to go with what you guys and gals recommend for me to purchase 8)

The pool is sunk in the ground right at 2 ft and I noticed today that it has a few high spots in it a few feet long. I think that we have had so much rain of late that water got under the bottom and caused this? Can I get a large piece of pvc pipe filled with concrete and smooth these back...

I lost it during the big move, even though I have just been a member for a few days I miss seeing it and my TFP Lifetime Avatar. I am sort of thinking that when I ask a really stupid question that everyone will see that I really almost paid for the answer :lol:

I just may bite the bullet and get the Aquabot Pool Rover Jr tomorrow, I checked the parts list and the Jr, regular Rover and ThunderJet all use the same motor A6005 PUMP MOTOR (Pool Rover Junior; Pool Rover; ThunderJet AG) Hey wether it works or not it looks pretty cool in the water tooling...

I just purchased the Brumgee green 17inch today at Rec Warehouse, it was 24 dollars and some change before tax. I just finished using it on my side walls and it worked great(AGP) The bristles are made out of rubber and are pretty firm but soft also if that makes any sense. It looks like that...

Here is a link that will show you how to do it http://www.artstor.org/help/Clear_my_browser_cache.htm

Thanks for all of the great information everyone..

What level should I try to keep my CYA level at for a Vinyl lined pool? I was looking at Bens chart and it seens to me that the lower the CYA is kept at the lower the shock will have to be which will be better for the wear and tear on the liner?? How high can I shock for a short period of time...

Just a quick update, we can finally see the bottom of the pool, still keeping the FC level right at 15 and the CC has dropped to 5. now. Looks like we are rounding 3rd base and heading for home.

Thats how I saw this thread :) I like the idea of seeing the recent thread scrolling topics, lets see if this one shows up there :D

I was thinking that would be your answer :lol: Thanks oe more time.